As an Amazon Associate I earn from qualifying purchases.
GEARWRENCH #ad - Set includes 2 ratcheting t handles, 2 extension adapters and a sliding t for the adapters, a 4mm hex key, SAE and metric thread gauges, 5 screw extractors, 3 sizes of tap adapters and 2 sizes of die adapter, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.
Die adapters work on round and hex shaped Dies. Blow mold carrying case with tilted tap holders for easy access and storage.
Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket Accessories. Drive extension adapters provide greater access in confined areas when used with 3/8inch Drive Extensions. Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting. Auto locking feature allow the tap adapters to be removed safely.
Minewill #ad - Note: please adjust the height of the chair you want before installing the office chair clip. Excellent replacement the chair saver kit: Suitable for most office chairs stools, office chairs, executive chairs, gaming chairs with a cylindrical diameter of 25-28mm or less. Easy to install chair saver kit: it takes only 5 minutes to install the office chair protector.
Bring your dying office chair back to life: when the cylinder fails, extend the life of the chair, let your office chair no longer sink, so that the chair can rotate smoothly and save the cost of buying a new chair.
Contact our professional after-sales service team by email. Our direct after-sales team will contact you and resolve your issue promptly. Thicker screws, strong weight-bearing capacity, our office chair repair kit are made of stainless steel, not easy to break or crack. You have nothing to lose！: all our chair repair kit are produced under strict quality inspection. Excellent material more durable: compared with other cheap iron and other plastic products, more practical and effective, better quality.
Fanfoobi #ad - Great for homebrewers or bars - approximately 8" l x 2" w x 1" T. The tap handle is very sturdy and made of a solid piece of Maple. Premium quality & sturdy walnut wood-make your bar look classy by having personalized tap handles with your special beer names or logos.
Designs 1 & 2: specify name and date ; Designs 3 & 4: Specify name and city, state. When selecting design, “front” is for engraving one side only. This custom tap handle is great for many applications such as bars, and much more.
Front & back” engraves both sides of the tap handle. During check out in the note to seller box please specify the wording to be engraved. They all have the standard 3/8 '' - 16 UNC threads which fit standard taps in the USA. Please remember that no two pieces of wood are alike and wood grain will differ slightly for each tap handle.
eForwish #ad - Great for use in bath, kitchen, Hanging for Plants Towels Pan Pot etc. Sturdy stainless steel towel hooks or kitchen utensil rack tool, with 7 hooks SUS304 Stainless Steel will not rust.
Custom Brew Gear #ad - Chalkboards on two sides to write what's on tap. Deeply engraved custom text. Size: 1. 4 x 1. 4 x 8 inches. Rustic saloon style metal star. Available in beautiful cherry or walnut wood.
OWL #ad - Owl. New display sunglasses stand. Sunglasses not included. 100% guarantee picture and item match. Size of display for sunglasses: Height with mirror 34. 5" height without mirror 26" Weightlbs.
Custom Brew Gear #ad - Choose from cherry or walnut wood. Beautifully laser engraved sides. Listing is for one tap handle. Personalized with your text and choice of icon. Chalkboard to write the current brew.
RZChome #ad - Please send us emails if you have any questions about this product and your order. Enough sturdy and stable to hold 4 water bottles of 5 gallons. Rzchome will offer a satisfied solution. The surface of the water buckets organizer is processed with black baking varnish.
Space saving rack the dimension of the water bottle holder: 13. 39 x 13. 07 x 4094 inches l x W x H. Sturdy & stable rack the water bottle holder is made of stainless steel. The water bottle rack can keep 4 water bottles of 5 gallons off the floor to save more space.
The water bottle rack can be detached and assembled into 2 tiers, bedroom, 3 tiers, or 4 tiers. Guaranteerzchome will provide a 45-day free refund and replacement, and 1-year maintenance. Protective rubber feet this water bottle storage rack comes with 4 rubber feet for keeping the 5-gallon water bottle organizer stable without slipping and also for preventing the floor from scratching or buffing. Waterproof and anti-rust.
Maple Landmark #ad - The wood grain pattern will vary due to the natural properties of wood. Hardwood red oak and chalkboard application are great for making your own unique tap handle.
1. GEARWRENCH
#ad82812, GEARWRENCH 114 Piece Ratcheting Tap and Die Set, SAE/Metric
#adDie adapters work on round and hex shaped Dies. Blow mold carrying case with tilted tap holders for easy access and storage.
More information #ad
Ratcheting t wrench works with GEARWRENCH pass thru socket system. Ratcheting t handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning. Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket Accessories. Drive extension adapters provide greater access in confined areas when used with 3/8inch Drive Extensions. Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting. Auto locking feature allow the tap adapters to be removed safely.
| Brand | GEARWRENCH #ad |
| Manufacturer | GearWrench #ad |
| Height | 3 Inches |
| Length | 21 Inches |
| Weight | 1.3 Pounds |
| Width | 13 Inches |
| Part Number | 82812 |
| Model | 82812 |
| Warranty | No Warranty - Consumable |
More information #ad
2. Minewill
#adFix Sinking Office Chair-Chair Saver Kit Stainless Steel Shaft,Wrench and nut，Office Chair Gas Lift Cylinder Holder,Saver for Stop Sinking Without Cylinder Replacement, No Tools Required
#adBring your dying office chair back to life: when the cylinder fails, extend the life of the chair, let your office chair no longer sink, so that the chair can rotate smoothly and save the cost of buying a new chair.
More information #ad
Your satisfaction is always our top priority. Our products also provide a 30-day free return/exchange service, If you have any questions about our products. Simply tighten the nut so that the diameter of the collar is smaller than the diameter of the air rod, and the chair will not sink. Contact our professional after-sales service team by email. Our direct after-sales team will contact you and resolve your issue promptly. Thicker screws, strong weight-bearing capacity, our office chair repair kit are made of stainless steel, not easy to break or crack. You have nothing to lose！: all our chair repair kit are produced under strict quality inspection. Excellent material more durable: compared with other cheap iron and other plastic products, more practical and effective, better quality.
| Brand | Minewill #ad |
| Manufacturer | Minewill #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
More information #ad
3. Fanfoobi
#adFanfoobi Laser Engraved 8" Custom Maple/Walnut Bar Tap Custom Beer Tap Handle-Laser Engraved with Chalkboard Personalized Keg Tap Wedding Beer Tap For Couple Personalized Keg Tap
#adDesigns 1 & 2: specify name and date ; Designs 3 & 4: Specify name and city, state. When selecting design, “front” is for engraving one side only. This custom tap handle is great for many applications such as bars, and much more.
More information #ad
If you need two handles tap, soda makers, personal kegerators, restaurants, weddings, events, homebrewers, please select quantity 2 when ordering. The pictures provided are of different taps to give a close example of what you will receive. Front & back” engraves both sides of the tap handle. During check out in the note to seller box please specify the wording to be engraved. They all have the standard 3/8 '' - 16 UNC threads which fit standard taps in the USA. Please remember that no two pieces of wood are alike and wood grain will differ slightly for each tap handle.
| Brand | Fanfoobi #ad |
| Manufacturer | Fanfoobi #ad |
| Part Number | A-WAL-WEDDING-2 |
More information #ad
4. eForwish
#adEForwish Kitchen Utensil Racks Rail Wall Mounted Utensil Hooks Rack Stainless Steel Hanger Hooks for Kitchen Tools Pot Towel 7 Hooks,2 Packs
#adMore information #ad
In need of some space to store your hanging tools, Look at this kitchen utensil. Easy wall mounted Way! Mount instantly on all smooth or textured surfaces. It is made entirely of durable stainless steel, and looks fantastic in every kitchen.| Brand | eForwish #ad |
| Manufacturer | eForwish #ad |
| Height | 2.76 Inches |
| Length | 15.75 Inches |
| Weight | 1.12 Pounds |
| Width | 1.34 Inches |
| Part Number | HOOK-25-2 |
More information #ad
5. Custom Brew Gear
#adStar Edition Laser Engraved Beer Tap Handle with Chalkboards Walnut Wood
#adMore information #ad
| Brand | Custom Brew Gear #ad |
| Height | 7 Inches |
| Length | 1.4 Inches |
| Width | 1.4 Inches |
More information #ad
6. OWL
#adDisplay 40 PCS for Sunglasses Eyewear Glasses Rack Holder Stand Display with Mirror Turning Rotating Spinning
#adMore information #ad
8. Manually turning rotating spinning white plastic Display 40 PCS for Sunglasses Eyewear Glasses Rack Holder Stand Display with Mirror. 4 sides display surfaces. Suitable for: Sunglasses, Eyeglasses, Reading Glasses. Item listed by online-welcome.| Brand | OWL #ad |
| Part Number | B01N7I9QNI |
| Model | B01N7I9QNI |
More information #ad
7. Custom Brew Gear
#adCustom Tap Handle-Vintage Edition
#adMore information #ad
| Brand | Custom Brew Gear #ad |
| Manufacturer | Custom Brew Gear #ad |
| Height | 1 Inches |
| Length | 10 Inches |
| Width | 2.75 Inches |
| Part Number | TH2500-RETRO |
More information #ad
8. RZChome
#ad4-Tier Water Jug Holder Rack Stainless Steel, 5 Gallon Water Bottle Detachable Rack Organizer Heavy and Durable Water Bottle Carrier with Holder Easy Assemble for Kitchen Drawing Room, Silver
#adSpace saving rack the dimension of the water bottle holder: 13. 39 x 13. 07 x 4094 inches l x W x H. Sturdy & stable rack the water bottle holder is made of stainless steel. The water bottle rack can keep 4 water bottles of 5 gallons off the floor to save more space.
More information #ad
Stackable & detachable rack the 4-tier water jug storage organizer has adjustable height according to need. The height-adjustable water bottle holder offers more choices for the kitchen, living room, and office. The water bottle rack can be detached and assembled into 2 tiers, bedroom, 3 tiers, or 4 tiers. Guaranteerzchome will provide a 45-day free refund and replacement, and 1-year maintenance. Protective rubber feet this water bottle storage rack comes with 4 rubber feet for keeping the 5-gallon water bottle organizer stable without slipping and also for preventing the floor from scratching or buffing. Waterproof and anti-rust.
| Brand | RZChome #ad |
| Height | 40.94 Inches |
| Length | 13.39 Inches |
| Weight | 9.12 Pounds |
| Width | 13.07 Inches |
| Part Number | WBS-4312-G |
| Model | WBS-4312-G |
More information #ad
9. Maple Landmark
#adClassic 11" Solid Red Oak Chalkboard Tap Handle
#adMore information #ad
Made in middlebury, Vermont, USA. The tap handle measures 11" high, 15/16" thick, and 2. 5" wide. The bottom has a threaded insert that fits onto all standard bar taps.| Brand | Maple Landmark #ad |
| Manufacturer | Maple Landmark #ad |
| Height | 11 Inches |
| Length | 1 Inches |
| Weight | 0.59 Pounds |
| Width | 2.5 Inches |
| Part Number | 68224 |
| Model | 68224 |
More information #ad
