As an Amazon Associate I earn from qualifying purchases.
BACHIN #ad - Imitation human writing: a drawing robot that can move a pen or other instrument to draw/write digital artworks on the flat surface like a human, no matter Chinese or English, etc.
Good for making the posters. A research tool for geeks, teachers, creators, DIY enthusiasts, automation researchers, students, etc. P. Colorful layer painting: It can draw the pictures with many different colors.
iDrawHome #ad - 5. You have to make fonts in the first place. If you wantto write in signle stroke lines, you have to make single stroke in the first place. Please contact seller for support with software installation if necessary.
6. Computer fonrts are outline fonts. 7. It doesn't support word files. 4. 3. Contact switch, power on/off, and pause buttons Give You Safer and More Convenience The limit switch can help you to find the beginning point each time.
Colorful layer painting, no more just white and Black Most of the generative arts are just white and black, with iDraw 2. 0, you will have a colorful world-by-layer printing function. Please contact seller for support with software installation if necessary. Better for repeat Jobs or Your Small Business. Note: it is a plotter, NOT a printer.
RATTMMOTOR #ad - Long term operation will not lead to problems such as excessive engine temperature, reduced torque and increased noise. This reduces vibration and noise when the engine is running. 17hs4401jhigh torque 64oz-in 45n. Cm ; size: 42 x 42 x 40 mm; 1.
8 degree ; rated current 1. 7a ; 4-lead wire with 1m cable 4-pin connector ; 2-phase Bipolar ; shaft diameter is 5mm. Low noisethe stepping motor is made of solid and durable metal. The copper wires are evenly arranged.
The perfect combination of rubber and rotor makes the internal structure more stable. The magnetic field of the motor is more stable, the torque is greater than that of similar products, the motor runs more quietly and stably, and the service life is longer. Long service life the rotor surface is coated with high-quality epoxy resin adhesive to isolate the adsorbed burrs on the rotor surface.
CNCTOPBAOS #ad - 1. Among the optical coupling isolation, or the same demanding signal as hand wheel A, communicating with the host computer, B. Therefore, the computer and machine tool isolate effectively. Some of the output port is reusable functinality.
The length of the usb cable and the 25-bit LPT cable cannot exceed 1. 5 meters. 3. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals.
A special high speed chip is used to process the input and output I/O signals. The computer lpt port supplies the power individually, separating from the power supply of other parts. 2. There are 12 output signal, which is allowed to controlling output, if your laptop does not have its own parallel port, one port only can be used as one function.5. This board only support LPT port, supporting as many as 6 axis linkage. 4.
Zhong Hua Jiang #ad - Specification15ft 18 awg gauge 0824mm² 4 conductor wirered & yellow and green & black & white. Cond. Resistance: 13. 7Ω/km20℃, insulation resistance: 10mΩ/km20℃, Dielectric test: 2000AC V/min. Material:PVC+Tinned Copper. Shield wirethe shielding layer can shield this electromagnetic field inside the cable.
Applicationit is widely used for chains in data and signal cables, sensor technology, control equipment and computer control engineering and machinery. High conductivitytinned copper not only has good electrical conductivity, but the tin coating also has the characteristics of strong corrosion resistance and oxidation resistance.
Rated voltage: 300v. Rated temperature : 80℃/176℉. Extreme flexible164pcs strands, 008mm/strand tinner cooper in every conductor, more than 10 million cycles, suitable for chain system. Shielded cables also serve as grounding protection: if there is damage to the core wire of the cable, such as the grounding grid. At this point, the leaked current can flow along the shielding layer, shielded cables serve as safety protection. It is also more suitable for soldering.
RATTMMOTOR #ad - Model number:rtm200;interface:usb, win7, parallel;O. S supported:it is compatible with win xp, win8 and win10 . Color: black;axis:support max 6 axis;The working frequency can reach up to 200KHz, good performance and high reliability.
RATTMMOTOR #ad - 5 single-step mode. 2 manual functions. Supports both via the machine input devices, mouse, also supported by the embedded computer input devices such as keyboard, such as handheld devices and other manipulation tools, complete manual operation.
Incremental feed function. 1 the basic configuration for the three axes of motion. Cnc turret support. Automatic processing. Users can set up the processing tasks to be performed as a single-step mode, which is the wrong diagnosis and Recovery provides a good support.
iDrawHome #ad - Please contact seller for support with software installation if necessary. 2. 5. Support over 100 fonts, you can customize Your Fonts Too. It doesn't support word files. 7. Note: it is a plotter, not a printer.
Colorful layer painting, no more just white and Black Most of the generative arts are just white and black, with iDraw 2. 0, you will have a colorful world-by-layer printing function. Lifetime support. 1. Please contact seller for support with software installation if necessary.
If you want to write in signle stroke lines, you have to make single stroke in the first place. Better compatibility with High Power La-ser Head, Explore More Possibility. Computer fonrts are outline fonts. 3. Contact switch, power on/off, and pause buttons Give You Safer and More Convenience The limit switch can help you to find the beginning point each time. 6. Better for repeat Jobs or Your Small Business.
CNCTOPBAOS #ad - Power supplyddcs-expert requires two power supplies, and the IO port power supply is Used for input and output and MPG port, the main power supply is used for the controller system, our parcel includes 2pcs 75W 24V DC power supply. This guarantees reliable control and easy operation.
The internal operating system is Linux based. Compatible g codecompatible with standard g-code, support popular CAD/CAM software, such as ArtCam, MasterCam, Aspire, jdsoft surfMill, ProE, Fusion 360 and so on;. Package includes1 x 4 axis cnc offline standalone motion controller ddcs-expert;1 x 4gb usb flash drive;1 x m3k extended keyboard;1x matching cable;1 x USB extension cable;1x 4GB USB flash drive;1 x network cable;2 x 75W 24V DC power supply;1 x 6 Axis MPG Pendant Handwheel with E-Stop.
Arm controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. Lathes, cnc routers, pick&place and Milling Machine, lathe and cutters are just a few examples. Applicationsthe ddcs expert can be used for many styles and types of CNC machines.
1. BACHIN
#adCNC Router Drawing Robot Kit Writer XYZ Plotter iDraw Hand Writing Robot Kit Open Source for Maker/Geek, Working Area A4
#adGood for making the posters. A research tool for geeks, teachers, creators, DIY enthusiasts, automation researchers, students, etc. P. Colorful layer painting: It can draw the pictures with many different colors.
More information #ad
Supported Software: Bachin Draw,. Applicable systems:xp/win7/win8/win10 ，Mac is not compatible. Open source: if you want to design your own XY plotter, the interface documentation can be provided the detailed info. As below in the description.| Brand | BACHIN #ad |
| Manufacturer | Bachin #ad |
| Height | 8.27 Inches |
| Length | 16.14 Inches |
| Width | 15.75 Inches |
More information #ad
2. iDrawHome
#adIDraw 2.0 XY Plotter Handwriting Machine with A3 Working Range, with Basement Plate, Twice Faster Writing Speed, iDrawHome 2.0 T-Structure Pen Plotter XY Plotter
#ad6. Computer fonrts are outline fonts. 7. It doesn't support word files. 4. 3. Contact switch, power on/off, and pause buttons Give You Safer and More Convenience The limit switch can help you to find the beginning point each time.
More information #ad
1. Support over 100 fonts, you can customize Your Fonts Too. Lifetime support. Higher precision and speed, the handwriting, time-saving and High-efficient replacing the servo motors with stepper motors, plotting, and lasering speed is 3-4 times that iDrawHo. Colorful layer painting, no more just white and Black Most of the generative arts are just white and black, with iDraw 2. 0, you will have a colorful world-by-layer printing function. Please contact seller for support with software installation if necessary. Better for repeat Jobs or Your Small Business. Note: it is a plotter, NOT a printer.
| Brand | iDrawHome #ad |
| Manufacturer | iDrawHome #ad |
| Height | 6.69 Inches |
| Length | 15.75 Inches |
| Width | 15.75 Inches |
| Part Number | 2.0T3P |
| Warranty | 1 year |
More information #ad
3. RATTMMOTOR
#adCNCTOPBAOS 5Pcs Nema 17 Stepper Motor 40mm 64oz-in 0.45NM 1.7A 1.8 Degree 2 Phase,with 1M Cable 4-pin Connector Bipolar Stepper Motor Nema17 for 3D Printer Hobby CNC Router Machine 17HS4401J
#ad8 degree ; rated current 1. 7a ; 4-lead wire with 1m cable 4-pin connector ; 2-phase Bipolar ; shaft diameter is 5mm. Low noisethe stepping motor is made of solid and durable metal. The copper wires are evenly arranged.
More information #ad
Advantagesthe coil of the motor is made of pure copper enamelled wire. Usage or applicationthis products are widely used in engraving machine, printing, textile automation, 3D printer, embroidery machine, packaging and other industries automation equipment. The perfect combination of rubber and rotor makes the internal structure more stable. The magnetic field of the motor is more stable, the torque is greater than that of similar products, the motor runs more quietly and stably, and the service life is longer. Long service life the rotor surface is coated with high-quality epoxy resin adhesive to isolate the adsorbed burrs on the rotor surface.
| Brand | RATTMMOTOR #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Height | 1.57 Inches |
| Length | 1.65 Inches |
| Weight | 0.84 pounds |
| Width | 1.65 Inches |
| Part Number | S17 |
| Model | 3216594568 |
More information #ad
4. CNCTOPBAOS
#adCNCTOPBAOS 5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine
#adThe length of the usb cable and the 25-bit LPT cable cannot exceed 1. 5 meters. 3. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals.
More information #ad
Name:mach3 control board;the mach3 interface board is connected to the computer through the USB port and the LPT port. It makes the data more secure, with further insurance of security and stability. A special high speed chip is used to process the input and output I/O signals. The computer lpt port supplies the power individually, separating from the power supply of other parts. 2. There are 12 output signal, which is allowed to controlling output, if your laptop does not have its own parallel port, one port only can be used as one function.5. This board only support LPT port, supporting as many as 6 axis linkage. 4.
| Brand | CNCTOPBAOS #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | 4V |
| Model | 4V |
More information #ad
5. Zhong Hua Jiang
#ad18AWG 18/4 4 Core Shielded Chain CNC Wire 15FT UL2464 Tinned Copper Core Extreme Flexible 18 Gauge Cable Speaker Wire for CNC Router Machine, Stepper Motor, 3D Printer, CNC VFD Spindle
#adApplicationit is widely used for chains in data and signal cables, sensor technology, control equipment and computer control engineering and machinery. High conductivitytinned copper not only has good electrical conductivity, but the tin coating also has the characteristics of strong corrosion resistance and oxidation resistance.
More information #ad
It can greatly extend the service life comparing with ordinary copper wire. Rated voltage: 300v. Rated temperature : 80℃/176℉. Extreme flexible164pcs strands, 008mm/strand tinner cooper in every conductor, more than 10 million cycles, suitable for chain system. Shielded cables also serve as grounding protection: if there is damage to the core wire of the cable, such as the grounding grid. At this point, the leaked current can flow along the shielding layer, shielded cables serve as safety protection. It is also more suitable for soldering.
| Brand | Zhong Hua Jiang #ad |
| Manufacturer | huajiang #ad |
| Part Number | 18AWG-15FT |
More information #ad
6. RATTMMOTOR
#adRATTMMOTOR Parallel to USB Adapter 200KHz MACH3 USB to Parallel Adapter RTM200 DB25 LPT Cable to USB Motion Controller Converter with USB Cable for LPT/USB Mach3 CNC Router Engraving Milling Machine
#adMore information #ad
Size:57x54x22mm;random delivery in black and gray color. It comes with a usB cable for easy connectionh3 software via plug in file. Support usb, replaces the lpt port;works with mac;it is mainly used for connecting with the control PC.| Brand | RATTMMOTOR #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | 4AXISUSBCNCKIT |
| Model | RTM200 |
More information #ad
7. RATTMMOTOR
#adCNCTOPBAOS 3 Axis NC Studio PCI Motion Ncstudio Control Card Interface Adapter Breakout Board for CNC Router Engraving Milling Machine Router Engraving Milling Machine
#adIncremental feed function. 1 the basic configuration for the three axes of motion. Cnc turret support. Automatic processing. Users can set up the processing tasks to be performed as a single-step mode, which is the wrong diagnosis and Recovery provides a good support.
More information #ad
3 user data input mdi function. 4 advanced processing instruction. Full support for iso standard g command, HP plotter HP PLT format and carved processing ENG format. Simply enter a few parameters, you can complete end milling, Crochet and other functions. Users can enter G command line and executed immediately.| Brand | RATTMMOTOR #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Weight | 1.1 Pounds |
| Part Number | 3NC |
More information #ad
8. iDrawHome
#adIDraw 2.0 XY Plotter Handwriting Robot Machine with A4 Working Range, iDrawHome 2.0 T-Structure Pen Plotter XY Plotter, with Plate, Twice Faster Writing Speed
#adColorful layer painting, no more just white and Black Most of the generative arts are just white and black, with iDraw 2. 0, you will have a colorful world-by-layer printing function. Lifetime support. 1. Please contact seller for support with software installation if necessary.
More information #ad
Open-source free software with lifetime update, Creators, Best STEAM Programming Robots for Students and Teachers, Geeks, DIY Enthusiasts, . If you want to write in signle stroke lines, you have to make single stroke in the first place. Better compatibility with High Power La-ser Head, Explore More Possibility. Computer fonrts are outline fonts. 3. Contact switch, power on/off, and pause buttons Give You Safer and More Convenience The limit switch can help you to find the beginning point each time. 6. Better for repeat Jobs or Your Small Business.
| Brand | iDrawHome #ad |
| Manufacturer | iDrawHome #ad |
| Height | 6.69 Inches |
| Length | 15.75 Inches |
| Width | 15.75 Inches |
| Part Number | 2.0TA4P |
| Model | iDraw048-2.0A4 |
| Warranty | 1 year |
More information #ad
9. CNCTOPBAOS
#adCNCTOPBAOS 4 Axis CNC Controller 1000KHz DDCS Expert Motion System Offline Standalone Servo/Stepper Motor Drive Control with 6 Axis MPG Handwheel+M3K Extended Keyboard+2pcs 75W 24V DC Power Supply
#adThe internal operating system is Linux based. Compatible g codecompatible with standard g-code, support popular CAD/CAM software, such as ArtCam, MasterCam, Aspire, jdsoft surfMill, ProE, Fusion 360 and so on;. Package includes1 x 4 axis cnc offline standalone motion controller ddcs-expert;1 x 4gb usb flash drive;1 x m3k extended keyboard;1x matching cable;1 x USB extension cable;1x 4GB USB flash drive;1 x network cable;2 x 75W 24V DC power supply;1 x 6 Axis MPG Pendant Handwheel with E-Stop.
More information #ad
Introductionddcs expert supports 4 axis or 5 axis; 1mhz 1000khz output frequency for each axis; 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys;it adopts the ARM+FPGA design framework. Arm controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. Lathes, cnc routers, pick&place and Milling Machine, lathe and cutters are just a few examples. Applicationsthe ddcs expert can be used for many styles and types of CNC machines.
| Brand | CNCTOPBAOS #ad |
| Manufacturer | Changzhou Rattm Motor Co.,Ltd #ad |
| Part Number | 4/5DDCESKIT |
| Model | 4 Axis DDCS Expert Kit |
More information #ad
