HomeSeer HSM200 Z-Wave Multisensor with LED Indicator#adHomeSeer #ad - Not for use with smartthings, Vera or Wink. Annunciator: rgb led may be programmed to glow 7 Different Colors When Things Happen In Your HomeSeer Controlled Smart Home. Z-wave plus multisensor: reports Motion, Temperature, Light Levels With Wireless Z-Wave Commands.
2. Philips Hue#ad
Exclusively for Philips Hue Smart Bulbs, Philips Hue Indoor Motion Sensor for Smart Lights Requires Hue Hub, Smart Home, Installation-Free#adPhilips Hue #ad - The smart sensor detects optimum daylight levels to conserve energy during the day. Place anywhere in your home including your hallway, kitchen, bathroom, and more. The integrated light sensor saves energy by detecting when rooms are vacant and automatically turning off lights.
The philips hue system can control up to 50 smart lights. The philips hue motion sensor requires a philips Hue bridge to make it part of your smart home lighting system. Our smart lights default settings get you going, or personalize these settings to fit your needs.
Installed in a minute. Have your lights turn on when you walk into a room, and off when you leave. The philips hue motion sensor can be placed freely for an optimal detection area, or mounted to a wall using screws included. The device is battery powered, wireless and installation free no re-wiring required to control your lights without hassle. When you use the philips hue motion sensor with a Philips Hue bridge, you can use it to control any HomeKit compatible appliance.
|Brand||Philips Hue #ad|
MS-OPS2-2-WH, White, No Neutral Required, Single-Pole 2 Pack, 250 Watts, Lutron Maestro Motion Sensor Switch#adLutron #ad - Programmable time out of lights 1, 5, 15 or 30 minutes. Automatically turns the lights on when you enter the room and off when you leave. Features xct sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently.
Installs in as little as 15 minutes; ground wire is required, no neutral required. Detects fine motion 2-3 times with up to 900 square feet of coverage.
|Manufacturer||Lutron Electronics Company, Inc. #ad|
ONVIS Smart Motion Sensor Wireless PIR Detector Works with Apple HomeKit Hygrometer Thermometer Temperature Humidity Gauge Siri Enabled Bluetooth Remote Trigger for iPhone iPad#adONVIS #ad - Low-energy & easy installation the ir homekit motion sensor paired via 5. 0 bluetooth in homekit accessories, offers fast and stable connectivity, this low power sensor can be deployed anywhere; Powered by 2xAAA alkaline batteries for up to 15000 hours use; its remaining battery power can be checked on ONVIS Home App.
Compatibility directly works with apple homekit compatible devices such as homekit switch/plug/outlet/bulb/camera/lock, Apple TV tvOS 101, no hub required; requires iPhone/iPad/iPod Touch iOS 101 or later, homePod iOS 11. 3 or later as hub for remote control. Homekit automation this pir motion detector acts as a remote trigger activated simply by movement; controlled via the Apple Home App or ONVIS Home App over Bluetooth, Siri voice control; setting custom scenes in your smart home system, for example, turning on the HomeKit lights and music if motion is detected.
Notification reminder you will get real-time notification in your iOS devices once movement is captured by the sensor, pets, 24/7 remote home security monitoring for kids, 100 recent detection records, elder people, unlimited motion detection notifications, etc.
White, Ring Floodlight Camera Motion-Activated HD Security Cam Two-Way Talk and Siren Alarm#adRing #ad - Talk to visitors through compatible Echo devices by saying “Alexa, talk to the front door”. Includes privacy features, such as customizable privacy zones and audio privacy, to focus only on what's relevant to you.
Includes built-in ultra-bright floodlights and a siren. With a ring protect plan subscription sold separately, record all your videos, review what you missed for up to 60 days, and share videos and photos.
|Warranty||1 year manufacturer warranty on parts.|
TOPGREENER TSOS5-White in Wall PIR Motion Sensor Light Switch, Neutral Wire Required, 1 Pack, Single-Pole, Occupancy Sensor Switch, On/Off Override, Fluorescent 500VA/Motor 1/8Hp/Incandescent 500W#adTOPGREENER #ad - Operating temperature 32 – 131°F. Max sensor coverage area 707 sq. 120vac, incandescent/halogen: 500w, cfl/led: 150w, motor: 1/8 HP. Motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room.
Occupancy sensor light switch features variable time delay from 15 sec test mode to 30 min. Ft. 180º field of view.
Ul listed. Neutral wire required for installation*please check with a qualified electrician to determine if you have the proper wiring*. Single pole use only. Motion sensor wall switch features adjustable range and sensitivity from 30% to 100%. Auto mode works as an occupancy sensor auto on, auto OFF. Wall plate sold separately. Ca title 20 compliant.
|Manufacturer||Top Greener Inc #ad|
White, Leviton IPS02-1LW Decora Motion Sensor In-Wall Switch, 2.5A, Auto-On, Single Pole#adLeviton #ad - 300w incandescent / halogen, 150w led / cfl, 200VA Fluorescent, 1/6HP Motor loads. Fits in standard wallbox and replaces single pole wall switch, no Neutral wire required for installation but ground wire is required.
TDOS5-W-STICKER Motion Sensor Light Switch, TDOS5, Occupancy Sensor Light Switch, 500W 1/8HP, PIR Sensor Switch, Neutral Wire Required, White, Single Pole, Motion Sensor Wall Switch, TOPGREENER#adTOPGREENER #ad - Neutral wire required, 180-degree field of view; 120vac, 500w incandescent/halogen, 314 square feet coverage, 250w cfl/led, 1/8HP motor; single pole only; wall plate NOT included; CA Title 20 & 24 compliant; wall plate sold separately; UL listed; 1-year warranty.
Sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room.
|Manufacturer||Top Greener Inc #ad|
9. Samsung Electronics#ad
Samsung SmartThings Home Monitoring Kit#adSamsung Electronics #ad - Range 50 100 feet. Trigger lights to automatically turn on when there's motion and turn off when people leave. Z wave certification id: ZC10 15090005. The samsung smartthings home monitoring kit contains: one Samsung SmartThings Hub, one Samsung SmartThings Motion Sensor, two Samsung SmartThings Multipurpose Sensors, and one Samsung SmartThings Outlet.
Everything you need to start your smart home. Control, automate and monitor your home from anywhere using the SmartThings app.
Pair the included video ready Samsung SmartThings Hub with a compatible camera to keep an eye on things. Connect compatible appliances, locks, speakers, sensors, lights, cameras, thermostats, appliances and more. Smartthings works with products from samsung, schlage, amazon, Honeywell, Osram Lightify, First Alert, Cree, Yale, bose, and more. Get immediate alerts on your smartphone if there's unexpected entry or motion in your home.
|Brand||Samsung Electronics #ad|
Works with Alexa, Google Assistant, 32563,White, Attaches to Existing Door Hinge, Left or Right Opening, ZWave Hub Required, GE Enbrighten Z-Wave Plus Smart Door Sensor#adGE #ad - The arm adjusts to fit properly and function as desired. Increase peace of mind by automatically turning on lights, sending notifications to your phone and more when a door opens or closes. As a battery-powered Z-Wave device, the sensor is not a signal repeater. Color match – in addition to a complementary design that blends into its surroundings, easy-to-install covers allow the sensor to match any door color or décor.
Simple & reversible installation – to adapt to various trim styles and activation preferences, standard door hinges with removable pins, the sensor allows easy calibration.
In addition to supporting all indoor, the sensor is reversible to accommodate left- or right-opening doors. It also serves as a notification if tampering with the sensor occurs. Led indicator displays status and provides feedback during programming. The long-lasting battery provides worry-free, reliable operation. Long-life battery – an included cr2 battery powers the sensor for up to 2 years. Trigger automations – the sensor communicates with a compatible hub to initiate desired actions of Z-Wave devices.
|Manufacturer||Jasco Products Company #ad|