As an Amazon Associate I earn from qualifying purchases.
Aaron #ad - They get really HOT when working. Keep resistors inchs away from plastic parts. You may connect the wires with the splice taps providedquick but maybe not solid.
Or you may cut the wires and connect them more solidly. Warning: load resistors heat up like halogen bulbs. Not designed for consistant working bulbs Day time running light, fog light, headlight LED bulbs.
iBrightstar #ad - Just connect the wires with the splice taps provided and no wire cutting is necessary. One resistor is required for each turn signal bulb or each license plate light bulb. Make sure you mount them away from any wires or plastic.
Aramox #ad - High performance: 7440 7440 a 992 t20 this error-free wire harness does not ensure troublesome rapid flashing nor error when attaching a single filament LED bulb to a turn signal light.
You can purchase with confidence. Wired already for Plug and Play. 16 gauge wire, high efficiency copper wiring. Features: this is a kind of 50w 8rJ 7440 T20 hyper flash correcting error free wiring harness harness. There is no need to change the stock wire at all.
BOAOSI #ad - Wide application: 6 ohm 50w led load resistors will work on any vehicle and can be connected across the turn signal bulbs to simulate the load of a regular filament bulb. Controls current flow: 6 ohm 50w led load resistors will control the current flow in electrical circuits.
Please apply the provided quick wire clip so you don’t have to cut any existing wires. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.
High quality: 6 ohm 50w led load Resistors is made of high quality materials to sustain a long lasting usage. One load resistor is required for each turn signal bulb. Note: led load resistor will get hot, therefore, please don't mount the LED load resistors on plastic, hoses or painted surfaces.
DSkoiph #ad - 50w 6-ohm load resistors for 3157 led bulbs with wire adapters to Fix Switchback LED error code or fast blinking issues related to the low current draw when using LED bulbs upgrading the halogen bulbs.
Compatible for the Standard Socket, NOT for the CK socket. Fit for most car made in the united states. The load resistor took cause heat during the normal use because it is a resistor and it needs to consume excessive current in the circuit to make the LED work.
mxuteuk #ad - One led resistor is required for each turn signal bulb or each license plate light bulb. It can work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb.
Mount it on metal surface, NOT plastic. Tips - each led turn signal required one resistor, but some motorcycles might require more than one per indicator depending on the original wattage and other aftermarket LED indicators/ resistors fitted.
Package include: 4pcs x 50w 8ohm Load resistors + 8Pcs x T-Taps. This will solve led related turn signal lights or license plate light problems, no flashing or burnt out bulb indications Load Resistors get really HOT when working. High quality material - made of high quality materials, these in-line resistors are durable and can be used for a long time.
Twidec #ad - Usually each lED bulb installation requires one resistor connected in parellel. Solution for "bulb out signal" / "obc error message" after installing SMD LED light bulb.
It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights. One-year warranty. If led load resistor will not solve led bulbs flashing issue, which mean the LED bulb is defective.
GLL #ad - Please don't touch it when the LED light is on. Easy installation with 13mm wire at each end of the resistor and T-Taps. Just connect the wires with the Splice taps provided. One led resistor is required for each turn signal bulb.
Fix blinker flash error, hyper or error flashing of 1157BAY15D LED turn signal light. Please buy with confidence. No wire cutting is necessary. If you have any question about the Load Resistors, please feel free to contact us for help.
4pcs 50 watts 6ohm load resistors + 8pcs quick wire clips load resistors for 1157BAY15D LED Turn Signal Light Fix, this will solve LED related turn signal lights problems, no flashing or burnt out bulb indications. Attention load resistors get really hot when working. We offer "2 years" Warranty, replacement or refund. Test for sale our items are tested for sale. Mount it on metal surface, NOT plastic.
AIRKOUL #ad - Easy to install: you just hook up one side to the positive wire that receives 12 volts when turn signal is on, and the other to the ground wire. This turn signal resistor solves hyper flash or no blinking of turn signal. Warning: led turn signal resistor will get really hot as a working halogen bulb, please mount them steadily onto metal surface and keep them off of any plastic parts to avoid plastic from melting down.
LivTee #ad - Prevent led turn signal lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard. One resistor is required for each turn signal bulb or each license plate light bulb.
1. Aaron
#ad4Pcs Aaron 50W 6ohm Load Resistors, Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code Resistors get very hot during working
#adOr you may cut the wires and connect them more solidly. Warning: load resistors heat up like halogen bulbs. Not designed for consistant working bulbs Day time running light, fog light, headlight LED bulbs.
More information #ad
Mount them on metal surface by screwsnot included. Solution for fast turn signal blinking response after installing LED light bulbs. Usually each led bulb installation requires one resistor connected in parellel see picture below for instruction. Resistors may become very hot to melt plastic parts nearby.| Brand | Aaron #ad |
| Weight | 0.26 Pounds |
| Part Number | A4-50W-6ohm |
| Model | A4-50W-6ohm |
More information #ad
2. iBrightstar
#adIBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
#adMore information #ad
Notice! load resistors heat up like light bulbs and get super HOT when working. Easy installation. 2pcs 50w 6ohm load resistors + 4PCS Quick wire Clip. Prevent led turn signal lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard.| Brand | iBrightstar #ad |
| Manufacturer | iBrightstar #ad |
| Height | 0.61 Inches |
| Length | 1.97 Inches |
| Weight | 0.05 Pounds |
| Width | 1.1 Inches |
| Part Number | iBrightstar-resistor-50W/6ohm |
More information #ad
3. Aramox
#adAramox Resistor Connector,7440 T20 50W8RJ Hyper Flash Fix Error Free Wiring Adapters For LED Turn Signal Lights
#adYou can purchase with confidence. Wired already for Plug and Play. 16 gauge wire, high efficiency copper wiring. Features: this is a kind of 50w 8rJ 7440 T20 hyper flash correcting error free wiring harness harness. There is no need to change the stock wire at all.
More information #ad
High quality: using this eliminates the need to tap resistors to break the stock harness and cause damage. Plug and play: 7440/992 / t20 single filament lamp connector. Male and female connectors are included. Quality assurance: we offer a 24 month product warranty, please feel free to contact us if you have any questions after receiving our product, we will do our utmost to solve your problem I will do my best.| Brand | Aramox #ad |
| Manufacturer | Aramox #ad |
| Height | 3.94 Inches |
| Length | 3.94 Inches |
| Width | 3.94 Inches |
| Part Number | Aramox25bzpy7xm1 |
More information #ad
4. BOAOSI
#adFix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code, Harness Adapter Anti Flicker Error Decoder Warning Canceller 50W 6ohm Pack of 4, BOAOSI LED Load Resistors
#adPlease apply the provided quick wire clip so you don’t have to cut any existing wires. It will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights.
More information #ad
Easy imstallation: 6 ohm 50w led load resistors is easy to install, just connect one wire to ground and the other wire to the turn/brake wire. Fixes light errors: 6 ohm 50w led load resistors will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper or error flashing of LED turn signal / parking light. High quality: 6 ohm 50w led load Resistors is made of high quality materials to sustain a long lasting usage. One load resistor is required for each turn signal bulb. Note: led load resistor will get hot, therefore, please don't mount the LED load resistors on plastic, hoses or painted surfaces.
| Brand | BOAOSI #ad |
| Manufacturer | BOAOSI #ad |
| Part Number | BOAOSI-USJM4FX |
More information #ad
5. DSkoiph
#ad2pcs 50W 6 Ohm 3157 3047 3057 3155 3457 4057 4114 4157 Led Load Resistors Fix Hyper Flash for Switchback LED Turn Signal Blink Light LED License Plate Lights Error Code
#adCompatible for the Standard Socket, NOT for the CK socket. Fit for most car made in the united states. The load resistor took cause heat during the normal use because it is a resistor and it needs to consume excessive current in the circuit to make the LED work.
More information #ad
Superseded part number: 3157 3357 3457ak, 3757ak standard base for turn signal bulb or LED License Plate Lights to avoid hyper flashing, 3157X, 4114k, 3057KLCP, 3357all, no flashing or burnt out bulb indications. Build-in with 50w 6-ohm double Load Resistors, Solve error message on dash board and headlight flickering issue.| Brand | DSkoiph #ad |
| Manufacturer | DSparts #ad |
| Part Number | 3157 4157 |
| Model | 3157 4157 |
More information #ad
6. mxuteuk
#adFix Error Flash Controller, with 8pcs Quick wire Clip 50W-8RJ-4, mxuteuk 4pcs Led Resistor Car Load Resistors 50W 8ohm for Fix LED Bulb Fast Hyper Flash LED Turn Signal Lights
#adMount it on metal surface, NOT plastic. Tips - each led turn signal required one resistor, but some motorcycles might require more than one per indicator depending on the original wattage and other aftermarket LED indicators/ resistors fitted.
More information #ad
Load resistors for led turn signal light fix or led license plate lights error fix. Package include: 4pcs x 50w 8ohm Load resistors + 8Pcs x T-Taps. This will solve led related turn signal lights or license plate light problems, no flashing or burnt out bulb indications Load Resistors get really HOT when working. High quality material - made of high quality materials, these in-line resistors are durable and can be used for a long time.
| Brand | mxuteuk #ad |
| Manufacturer | mxuteuk #ad |
| Part Number | 50W-8RJ-4 |
| Model | 50W-8RJ-4 |
More information #ad
7. Twidec
#adTwidec/4Pcs 50W 6Ohm LED Load Resistors For Fix LED Hyper Flash Turn Signal Light Bulb Fast Blink Error Code Warning Cancellor RX24-50W6-4X
#adIt will put a specific amount of resistance into your LED lights to make it function properly because LEDs uses less energy than your regular lights. One-year warranty. If led load resistor will not solve led bulbs flashing issue, which mean the LED bulb is defective.
More information #ad
Easy installation:Just connect the wires with the splice taps provided. Load resistors heat up like light bulbs and get really HOT when working. Please keep resistors inchs away from plastic parts. Solution for fast turn Signal Blinking response after installing LED light bulb. 6 ohm 50w led load resistors will control the current flow in electrical circuits.| Brand | Twidec #ad |
| Manufacturer | Twidec #ad |
| Part Number | RX24-50W6-4X |
| Model | RX24-50W6-4X |
More information #ad
8. GLL
#ad50W 6Ohm LED Load Resistors for 1157 BAY15D LED Turn Signal Lights Fix Hyper Flash, especially for 1157 White/Amber Switchback LED, Warning Cancellor with 8pcs Quick Wire Clips
#adFix blinker flash error, hyper or error flashing of 1157BAY15D LED turn signal light. Please buy with confidence. No wire cutting is necessary. If you have any question about the Load Resistors, please feel free to contact us for help.
More information #ad
Function it can work on any vehicle and can be connected across the turn signal bulbs to simulate the load of a regular filament bulb 2 Amp load. 4pcs 50 watts 6ohm load resistors + 8pcs quick wire clips load resistors for 1157BAY15D LED Turn Signal Light Fix, this will solve LED related turn signal lights problems, no flashing or burnt out bulb indications. Attention load resistors get really hot when working. We offer "2 years" Warranty, replacement or refund. Test for sale our items are tested for sale. Mount it on metal surface, NOT plastic.
| Brand | GLL #ad |
| Manufacturer | Grandview #ad |
| Height | 0.87 Inches |
| Length | 1.97 Inches |
| Width | 0.67 Inches |
| Part Number | ZYYAT0019-50W6Ohm |
More information #ad
9. AIRKOUL
#adAIRKOUL 50W 6ohm Load Resistor-Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code, 8pcs, Amber
#adMore information #ad
Package included: 8pcs load resistor, 16pcs T-Taps. Usually each leD bulb installation requires one resistor connected in parellel.| Brand | AIRKOUL #ad |
| Manufacturer | AIRKOUL #ad |
| Part Number | FH0039x8 |
| Model | gram |
More information #ad
10. LivTee
#adLivTee 4Pcs 50W 6ohm Load Resistors, Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
#adMore information #ad
Notice! load resistors heat up like light bulbs and get super HOT when working. Just connect the wires with the splice taps provided and no wire cutting is necessary. Easy installation. 4pcs 50w 6ohm load resistors + 4pcs Quick wire Clip. Make sure you mount them away from any wires or plastic.| Brand | LivTee #ad |
| Manufacturer | LivTee #ad |
| Part Number | LivTee-resistors-50W/6Ohm |
More information #ad
