Top 10 Duel Exhaust Pipes – Automotive Performance Cat-Back Exhaust Systems

As an Amazon Associate I earn from qualifying purchases.

1. Dynomax

#ad

Dynomax 89004 Universal Dual Kit

#adDynomax #ad - Build it yourself -- design and custom fabricate your own exhaust system with this kit that attaches to OE headers. Specs -- extra-long tailpipes with side exits with a full 2. 25-in. Improved flow capacity -- smooth bends improve flow capacity over traditional bends. Diameter; tail pipes exit each side of vehicle behind rear tires. Compatibility -- designed for a variety of full-size 1973-89 gMC 4WD trucks and Chevrolet 4WD SUVs; see product information for compatibility and engine spec. Flexible mounting -- special reducer design allows for a variety of mounting options.

Brand	Dynomax #ad
Manufacturer	Dynomax #ad
Height	17.5 Inches
Length	55.5 Inches
Weight	37.5 Pounds
Width	8.5 Inches
Part Number	89004
Model	89004
Warranty	No Warranty

2. Truck Exhaust Kits

#ad

Shop Line Dual Exhaust Sytem 2.5 inch Aluminized Pipe Y Pipe Chrome Tips, Truck Exhaust Kits

#adTruck Exhaust Kits #ad - This product is in compliance with the Clean Air Act in full. Vehicle Specific. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Jones y pipe 3 in dual 2. 5 out;high quiality 2. 5 mandrel bent aluminized tail pipes;installation hardware Included;Welding not Required;Disclaimer This product does not interfere with any portion of the vehicles emissions control systems.

Brand	Truck Exhaust Kits #ad
Manufacturer	Truck Exhaust Kits #ad
Height	9 Inches
Length	48 Inches
Width	20 Inches
Part Number	AM25DR94032YPSW18RE0

3. Magnum Exhaust

#ad

Flowmaster Super 44 Mandrel-Bent Aluminized Dual Truck Exhaust Kit w/Chrome Tips for Silverado, Sierra, F-Series & Ram

#adMagnum Exhaust #ad - Performance dual exhaust for Ram, Ford F-Series, Silverado & Sierra trucks. Two 2. 5 inch high-flow mandrel-bent tailpipes, cut and swedged. Single 3 inch inlet /dual 2. 5 inch outlet Flowmaster Super 44 Muffler. Two 3. 5 inch x18 inch wELD-ON angle-cut chrome tips.

Brand	Magnum Exhaust #ad
Manufacturer	Magnum Exhaust #ad
Height	9 Inches
Length	48 Inches
Weight	100 Kilograms
Width	21 Inches
Part Number	DK107-CH

4. Walker

#ad

Walker Exhaust 50484 Exhaust Y Pipe

#adWalker #ad - Available in different sizes -- offered in a variety of lengths and diameters and features the appropriate Inlet Diameter I. D. Oe-style performance -- direct-fit design is fixture checked to ensure a precise fit that performs like original equipment.

Inhibits corrosion -- durable aluminized-steel construction to inhibit corrosion and promote performance. Easy to install -- manufactured with precision bends and OE-style routings, hangers and connectors for easy installation where applicable. Better together -- use premium walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade. Outlet Diameter O. D. Connection; see product specifications for more information.

Brand	Walker #ad
Manufacturer	Walker Exhaust #ad
Height	10 Inches
Length	47 Inches
Weight	6 Pounds
Width	13 Inches
Part Number	50484
Model	50484
Warranty	Contact retailer/seller for support

5. Upower

#ad

Upower Dual Exhaust Tip 2.5 Inch Inlet 3.5 Inch Outlet 2.5" to 3.5" Diesel Exhaust Tailpipe Blue Burnt 304 Polished Stainless Steel 10.5" Long Weld-on Exhaust Tail Pipe Pack of 2

#adUpower #ad - Before to buy, please make sure the Brand Logo "Upower". Materials: vacuum plating blue process & Made of 304 Stainless steel has very strong anti-corrosive, Never Rusty. Weld on installation and Single Layer-Straight Cut-Y Pipe design. Pack of 2 dual blue exhaust tips; Professional installation is highly recommended; No instruction included. There is 1 year warranty for each purchase. Please do check all the dimensions before purchasing in case of installation interference. Universally fits tailpipes of 2. 5" outer diameter.

Brand	Upower #ad
Manufacturer	PartsSquare #ad
Height	4.72 Inches
Length	10.24 Inches
Width	9.06 Inches
Part Number	184286

6. DNA MOTORING

#ad

DNA Motoring ZTL-25RAW 16 Pcs 2.5 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

#adDNA MOTORING #ad - Diy custom: these exhaust bend kits include enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It. Maximizing smoothest High Exhaust Air Flow Rate. Universal kit: 4 pcs 48" straight pipes, 4 pcs 45 degree Pipes, 4 pcs 90 Degree Pipes, 4 pcs 180 Degree U-Bends. Specification: 18-gauge piping walls, Inlet / Outlet Size IN : 2. 5" od. Easy to use: slip fit Joints to Provide Easiest Fabrication. Sturdy structure: made of high quality mild steel with Computerized Mandrel-Bends for Strength and Durability, i. E.

Brand	DNA MOTORING #ad
Manufacturer	DNA MOTORING #ad
Height	6 Inches
Length	49 Inches
Width	18 Inches
Part Number	ZTL-25RAW
Model	ZTL-25RAW
Warranty	Please contact the seller directly for warranty information for this product

7. Truck Exhaust Kits

#ad

Truck Exhaust Kits, Shop Line Dual Exhaust System 2.5 Aluminized Pipe Stainless Flow II Muffler Chrome Tips

#adTruck Exhaust Kits #ad - Disclaimer* this product does not interfere with any portion of the vehicle’s emissions control systems. Installation Hardware Included. The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. High quiality 2. 5" mandrel bent Aluminized Tail Pipes. This product is in compliance with the Clean Air Act in full. Flow ii muffler is a high performance straight through stainless muffler option. Welding not Required.

Brand	Truck Exhaust Kits #ad
Manufacturer	Truck Exhaust Kits #ad
Height	9 Inches
Length	48 Inches
Width	20 Inches
Part Number	AM25DR9403FL2SW18RE0

8. Truck Exhaust Kits

#ad

Truck Exhaust Kits, Shop Line Dual Exhaust Sytem 2.5 inch Aluminized No Muffler

#adTruck Exhaust Kits #ad - The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. This product is in compliance with the Clean Air Act in full. Vehicle Specific. No muffler included;high quiality 2. 5 mandrel bent aluminized tail pipes;installation hardware Included;Welding not Required;Disclaimer This product does not interfere with any portion of the vehicles emissions control systems.

Brand	Truck Exhaust Kits #ad
Manufacturer	Truck Exhaust Kits #ad
Height	9 Inches
Length	48 Inches
Width	20 Inches
Part Number	AM25DR9403NMFNT00RE0

9. Walker

#ad

Walker Exhaust 36326 Universal Exhaust Flex Pipe

#adWalker #ad - New walker accessories help to ensure effective exhaust repairs. Universal fit for installation flexibility. Includes 18" galvanized flex tubing and u-bolt clamp. Offered in a variety of sizes for your exhaust repair needs. Material:aluminized steel.

Brand	Walker #ad
Manufacturer	Walker Exhaust #ad
Height	2.5 Inches
Length	18 Inches
Weight	0 pounds
Width	2.5 Inches
Part Number	36326
Model	36326
Warranty	No Warranty

10. Truck Exhaust Kits

#ad

Shop Line Dual Exhaust Sytem 2.5 inch Aluminized Pipe Y Pipe With Side Exit Adapters, Truck Exhaust Kits

#adTruck Exhaust Kits #ad - The intent of the product is to retain all emissions control devices and their intended purpose on the vehicle. Disclaimer this product does not interfere with any portion of the vehicle’s emissions control systems. Installation Hardware Included. Jones y pipe 3 inch in Dual 2. 5 inch out. Welding not Required. Fit type: Vehicle Specific. High quiality 2. 5 inch mandrel Bent Aluminized Tail Pipes. This product is in compliance with the Clean Air Act in full.

Brand	Truck Exhaust Kits #ad
Manufacturer	Truck Exhaust Kits #ad
Height	9 Inches
Length	48 Inches
Width	20 Inches
Part Number	AM25DR94032YPNT00905