The Hillman Group 59011 1/4-Inch Vinyl Thread Protector 2 Packs of 40

White finish. Vinyl thread Protectors are excellent for use as pipe thread protectors. The pliable vinyl cushions the threads against damage and will not crack or shred like many hard plastic caps. Protection against shocks and the added value to the appearance of the product. Applications include: protection during transport, protection against liquids and/or dirt Save when you buy the 2-Pack!

Prevents dirt from entering your inflator. The flexible vinyl material stretches over the threads to provide a tight seal that not only protects the threads, but also keeps contaminants out of the pipe or tubing.


Hillman 707322 Installation Tools Wing Nut Driver

Driver tool to simplify your installation process. To simplify installation, Hillman offers a number of driver tools. These tools are made of high quality steel for extreme durability. Great for any repair job. Made of high-quality steel for strength and durability. 1 piece per retail package.


The Hillman Group 707319 XL Washered Wing Nut 1/4-20 50-Pack

Driver tool to simplify your installation process. Made of zinc die Cast, will not rust or corrode. These nuts have a built in washer. Wing nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Great for any repair job. Tools are not needed to install this product; to tighten simply turn the nut by hand.

This nut has a wing on each side that helps you to tighten the nut without tools. 1 piece per retail package. Made of high-quality steel for strength and durability. Various sizes available.


Wing Nut Drill Bit Socket Tool, 1/4" Hex Shank for Panel Nuts, Screws Eye C Hook & Q-Hanger, Steel - PAGOW 2-Pack Hurricane Wingnut Driver

This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster. Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

This steel wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. This nut has a wing on each side that helps you to tighten the nut without tools. Various sizes available. Made of zinc die Cast, will not rust or corrode. Great for any repair job. These nuts have a built in washer.

Driver tool to simplify your installation process. This wingnut driver designed to tighten or loosen wing nuts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, bolts, and saves lots of your time and get your job done more faster. Made of high-quality steel for strength and durability.

. The total length of the tool is about 6. 55cm2.


Works w/Many Hurricane Shutters - WIDGETCO 1/4" x 1" Screw Thread Protectors, White

1/4 inch x 1 inch white screw thread Protectors fit 1/4 inch 1/4-20 screws and bolts. Made of zinc die Cast, will not rust or corrode. Functions as a thread protector, Decorator, Insulator, Mask for painting, Seal or to Color Code. This nut has a wing on each side that helps you to tighten the nut without tools.

This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster. Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

This steel wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. Inside length: 1. 000". Great for any repair job. Made of high-quality steel for strength and durability. Simply slide over the threaded end of the screw or bolt. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17.




The Hillman Group 831491 XL Washered Wing Nut 1/4-20 1 Pack of 100

The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17. 8mm07 inch; and the slot cutout is 4mm0157 inch wide. This little wing nut driver is made from CR-V steel, highly strong and sturdy. Inside diameter: 0234" designed to stretch. This wingnut driver designed to tighten or loosen wing nuts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, bolts, and saves lots of your time and get your job done more faster.

Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers. This steel wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. Great for any repair job.

Wing nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. These nuts have a built in washer. Includes 1 pack of 100 pieces of wing nut per pack. Made of zinc die Cast, will not rust or corrode. Inside length: 1. 000".


Hurricane Hardware Sidewalk Bolts 1/4-20 x 1-1/2"

Various sizes available. Available in Multiple Lengths. Sidewalk Bolts for use with Sammys. We recommend using the 1/2" length as a "Cover" bolt, kept screwed in all the time to prevent dirt and debris from entering Sammy threads. Great for any repair job. This wingnut driver designed to tighten or loosen wing nuts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, bolts, and saves lots of your time and get your job done more faster.

Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers. This steel wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. Stainless Steel, No Rust Finish.

Inside length: 1. 000". Any questions, please call. 1 piece per retail package. Made of zinc die Cast, will not rust or corrode. These nuts have a built in washer. For use with sammy Tapcon Hurricane Protection Products.


1/4-20 x 1-1/2" Truss Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Bright Finish, Machine Thread, Quantity 25 Pieces by Fastenere

Driver tool to simplify your installation process. Stainless Steel, No Rust Finish. Machine screws have with "machine" threads for use with a nut or in a tapped hole. For use with sammy Tapcon Hurricane Protection Products. This nut has a wing on each side that helps you to tighten the nut without tools. Head diameter 0

573". Sidewalk Bolts for use with Sammys. Inside length: 1. 000". Made of high-quality steel for strength and durability. These nuts have a built in washer. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17. 8mm07 inch; and the slot cutout is 4mm0157 inch wide. This little wing nut driver is made from CR-V steel, highly strong and sturdy.

Inside diameter: 0234" designed to stretch. 18-8 stainless steel provides strength and offers good corrosion resistance in many environments.


PANOVOS 2pc Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4" Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt

Head height 0150". Made of high-quality steel for strength and durability. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17. 8mm07 inch; and the slot cutout is 4mm0157 inch wide. This little wing nut driver is made from CR-V steel, highly strong and sturdy. Inside diameter: 0

234" designed to stretch. Available in Multiple Lengths. Thread diameter 0250". These nuts have a built in washer. This nut has a wing on each side that helps you to tighten the nut without tools. Sidewalk Bolts for use with Sammys. This wingnut driver designed to tighten or loosen wing nuts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, bolts, and saves lots of your time and get your job done more faster.

Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers. This steel wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. Various sizes available.

This nut has a wing on each side that helps you to tighten the nut without tools.


YEJI 50 Pcs 1/4" External Diameter White Screw Thread Protectors

Driver tool to simplify your installation process. Head height 0150". Stainless Steel, No Rust Finish. Phillips Drive Size #3. For use with sammy Tapcon Hurricane Protection Products. Inside diameter: 5. 9mm / 0234in designed to stretch. These nuts have a built in washer. These nuts have a built in washer. Head diameter 0

573". This wingnut driver designed to tighten or loosen wing nuts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, bolts, and saves lots of your time and get your job done more faster. Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

This steel wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank. Inside length: 1. 000". Your impact driver or drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand. Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

This wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank.


WIDGETCO 1/4" x 1" Screw Thread Protectors, White - Works w/Many Hurricane Shutters

Inside length: 1. 000". Driver tool to simplify your installation process. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17. 8mm07 inch; and the slots on the drill bit tool is 4mm1. 55 inch wide. Hurricane wing nuts driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.

. The total length of the tool is about 6. 55cm2. 6 inch; the outer diameter of the socket is about 17. 8mm07 inch; and the slot cutout is 4mm0157 inch wide. This little wing nut driver is made from CR-V steel, highly strong and sturdy. Inside diameter: 0234" designed to stretch. Stainless Steel, No Rust Finish. This nut has a wing on each side that helps you to tighten the nut without tools.

Various sizes available. Sidewalk Bolts for use with Sammys. Phillips Drive Size #3.