General Tools 15 Drill Gage, Number Size Drills 1 To 60

General Tools 15 - The bit sizes and decimal equivalents are permanently etched to the face to provide years of dependable use. General tools - the precise tool for doing the job exACTLY RIGHT. Stainless steel. General's drill gages help you to quickly and accurately identify the sizes of stray drill bits in your workshop. We strive to provide our customers with 100% satisfaction.

Offering over 1, 000 tools, craftsmen and diyers around the world with a broad range of affordable, we’re proud to provide tradesmen, specific-purpose mechanical hand tools and precision measuring and inspection tools.6-1/2" x 2-1/2" wide. These gages can be extremely useful with older, unmarked bits or ones that are too small for markings.

General Tools 15 Drill Gage, Number Size Drills 1 To 60 - Number size drills 1 to 60 Hole sizes and decimal equivalents are permanently marked on the face. Conform to government specifications GG-G-86b. Each heat treated, heavy steel gage is machined to close tolerance for spot-on accuracy. For inquiries, please contact our Customer Service Department at 212-431-6100

Work smarter, measure better & be more productive with general tools made of heat treated heavy gage steel, machined and ground to close tolerances.





General Tools 24 Hobby Drill Gage

General Tools 24 - This product is manufactured in China. General tools hobby drill gage is extremely helpful when working with older, unmarked drill bits, as well as with bits that are too small to fit diameter markings. Gage measures 2-3/8 inch x 6-3/4 inch overall. Work smarter, measure better & be more productive with general tools fraction Drill Gauge.

We strive to provide our customers with 100% satisfaction. The hobby drill gage is a useful guide for identifying drill bit sizes and measures bits from 1/16 inch to 1/2 inch x 64ths. Offering over 1, 000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

General Tools 24 Hobby Drill Gage - Gage measures 2-3/8 inch x 6-3/4 inch overall. The hobby drill gage is a useful guide for identifying drill bit sizes and measures bits from 1/16 inch to 1/2 inch x 64ths. This product is highly durable. General tools hobby drill gage is extremely helpful when working with older, unmarked drill bits, as well as with bits that are too small to fit diameter markings.

For inquiries, please contact our Customer Service Department at 212-431-6100 Etched graduations are filled in black to give high contrast and will not wear off this drill gauge. This drill gage is made from stainless steel to prevent rust.





General Tools 715 Tap and Drill Reference Table

General Tools & Instruments 715 - The double-sided guide features a tap drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths. Front side has a machine screw size tap drill chart for recommended 75% depth thread. A must have for any toolmaker, machinist or mechanic. For inquiries, please contact our Customer Service Department at 212-431-6100

This product is highly durable. We strive to provide our customers with 100% satisfaction. Features a convenient 6 inch ruler for any additional measuring. Offering over 1, craftsmen and diyers around the world with a broad range of affordable, we’re proud to provide tradesmen, 000 tools, specific-purpose mechanical hand tools and precision measuring and inspection tools.

General Tools 715 Tap and Drill Reference Table - Gage measures 2-3/8 inch x 6-3/4 inch overall. The tap drill reference table works with National Fine, National Course, American Standard Pipe and Metric threads. Etched graduations are filled in black to give high contrast and will not wear off this drill gauge. The tap drill reference table works with National Fine, National Course, American Standard Pipe and Metric threads.

General tools - the precise tool for doing the job exACTLY RIGHT. This drill gage is made from stainless steel to prevent rust. Work smarter, measure better & be more productive with general tools fraction Drill Gauge.





Screw Chek’r SAE/ Inch Screw Thread Size Gauge No. 1 to 5/16 1/8 Inch Heavy Gauge Steel Screw Checker, Made in USA

Ruelle 02110 - The tap drill reference table works with National Fine, National Course, American Standard Pipe and Metric threads. This quality tool made of heavy gauge steel is satin chrome plated, expertly machined and American made. Front side has a machine screw size tap drill chart for recommended 75% depth thread.

A must have for any toolmaker, machinist or mechanic. Comes with a Protective Plastic Carrying Case. Unlike their plastic counterparts, made of heavy gauge steel, these screw checkers, will last for a very long time without the worry of wearing out the threads after a few uses. Gage measures 2-3/8 inch x 6-3/4 inch overall.

Screw Chek’r SAE/ Inch Screw Thread Size Gauge No. 1 to 5/16 1/8 Inch Heavy Gauge Steel Screw Checker, Made in USA - This tool gives all the information needed to properly identify machine screws, and even cotter pins and rivets. Identifies diameter, and length, size, nf, pitch, with a tap drill chart for sizes ranging from No. The double-sided guide features a tap drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths.

The sae/ inch screw checker is a precision threaded tool for complete instant identification of both coarse and fine thread metric screws. Features a convenient 6 inch ruler for any additional measuring. Proudly made in the U. S.





Irwin 12092 1/16-to-1/2-Inch 29-Hole Steel Drill Bit Gauge

IRWIN 12092 - Comes with a Protective Plastic Carrying Case. This tool gives all the information needed to properly identify machine screws, and even cotter pins and rivets. Identifies diameter, nf, and length, pitch, size, with a tap drill chart for sizes ranging from No. The double-sided guide features a tap drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths.

Hole sizes and decimal equivalents etched on face. This tool can also be used to straighten bent screws and clean dirty or rusty threads. Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. Fraction Drill Gauge. Say goodbye to frustration with this easy to use, handymen, sheet metal screws, wood screws, bolts, pocket sized tool.

Irwin 12092 1/16-to-1/2-Inch 29-Hole Steel Drill Bit Gauge - The hobby drill gage is a useful guide for identifying drill bit sizes and measures bits from 1/16 inch to 1/2 inch x 64ths. Front side has a machine screw size tap drill chart for recommended 75% depth thread. This drill gage is made from stainless steel to prevent rust. Heavy-gauge steel, 6-1/2" L. This product is highly durable.

A must have for any toolmaker, machinist or mechanic.





Metal Drill Bit Gauge Wire Bolt Size Diameter Index Metric & SAE \Black

Cal Hawk Tools CZDBG-2 - This tool gives all the information needed to properly identify machine screws, and even cotter pins and rivets. Identifies diameter, size, nf, pitch, and length, with a tap drill chart for sizes ranging from No. The double-sided guide features a tap drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths.

Front side has a machine screw size tap drill chart for recommended 75% depth thread. Metal drill bit gauge wire bolt size diameter index metric and SAE \black. Etched graduations are filled in black to give high contrast and will not wear off this drill gauge. Say goodbye to frustration with this easy to use, wood screws, handymen, bolts, sheet metal screws, pocket sized tool.

Metal Drill Bit Gauge Wire Bolt Size Diameter Index Metric & SAE \Black - Comes with a Protective Plastic Carrying Case. Proudly made in the U. S. A. Steel drill gauge for checking fractional bit diameters. The hobby drill gage is a useful guide for identifying drill bit sizes and measures bits from 1/16 inch to 1/2 inch x 64ths. This tool can also be used to straighten bent screws and clean dirty or rusty threads.

Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel.





General Tools 14 Drill Gage, 1/16-Inch to 1/2-Inch

General Tools 14 - This tool gives all the information needed to properly identify machine screws, and even cotter pins and rivets. Identifies diameter, and length, nf, pitch, size, with a tap drill chart for sizes ranging from No. Front side has a machine screw size tap drill chart for recommended 75% depth thread. Say goodbye to frustration with this easy to use, handymen, wood screws, sheet metal screws, bolts, pocket sized tool.

. This product is manufactured in China. General tools hobby drill gage is extremely helpful when working with older, unmarked drill bits, as well as with bits that are too small to fit diameter markings. This drill gage is made from stainless steel to prevent rust. Comes with a Protective Plastic Carrying Case.

General Tools 14 Drill Gage, 1/16-Inch to 1/2-Inch - Fractional size drills 1/16 to 1/2 x 64ths. This tool can also be used to straighten bent screws and clean dirty or rusty threads. Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. Etched graduations are filled in black to give high contrast and will not wear off this drill gauge. 1 through 5/16 inch in NC, and NS pitches.

Proudly made in the U.





Woodstock D4141 Drill-Gauge Set, 3-Piece

WOODSTOCK D4141 - Even includes a tap drill/clearance drill reference chart. Lists numbered 1 to 60 lettered a to Z and fractional 1/16 to 1/2-Inch by 1/64-Inch increments. Gage measures 2-3/8 inch x 6-3/4 inch overall. This tool gives all the information needed to properly identify machine screws, and even cotter pins and rivets.

Identifies diameter, and length, size, pitch, nf, with a tap drill chart for sizes ranging from No. The tap drill reference table works with National Fine, National Course, American Standard Pipe and Metric threads. This drill gage is made from stainless steel to prevent rust. Comes with a Protective Plastic Carrying Case.

Woodstock D4141 Drill-Gauge Set, 3-Piece - This item is general tools & instruments 14 drill Gage, 1/16-inch to 1/2-inch. Proudly made in the U. S. A. Steel drill gauge for checking fractional bit diameters. The double-sided guide features a tap drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths. This product is highly durable.

This tool can also be used to straighten bent screws and clean dirty or rusty threads. Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel.





Made in USA - Metric Screw Checker 2mm to 7mm

Ruelle 02120 - This product is highly durable. Front side has a machine screw size tap drill chart for recommended 75% depth thread. This tool can also be used to straighten bent screws and clean dirty or rusty threads. Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. Comes with a Protective Plastic Carrying Case.

Proudly made in the U. S. A. Do it yourselfers, and mechanics can save time and money by accurately identifying different types of screws the first time. This item is general tools & instruments 14 drill Gage, 1/16-inch to 1/2-inch. This tool gives all the information needed to properly identify machine screws, pocket sized tool.

Made in USA - Metric Screw Checker 2mm to 7mm - Fraction Drill Gauge. This product is manufactured in China. General tools hobby drill gage is extremely helpful when working with older, unmarked drill bits, as well as with bits that are too small to fit diameter markings. Gage measures 2-3/8 inch x 6-3/4 inch overall. This tool can also be used to straighten bent screws and clean dirty or rusty threads.

Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. Stainless steel.





Screw Chek'r SAE/Inch Screw Checker No. 4 to 1/2 1/8 Inch Heavy Gauge Steel Screw Checker, Made In USA

Ruelle 02140 - This tool can also be used to straighten bent screws and clean dirty or rusty threads. Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. Say goodbye to frustration with this easy to use, handymen, sheet metal screws, wood screws, bolts, pocket sized tool. This drill gage is made from stainless steel to prevent rust.

Features a convenient 6 inch ruler for any additional measuring. This tool gives all the information needed to properly identify machine screws, pocket sized tool. Stainless steel. Metal drill bit gauge wire bolt size diameter index metric and SAE \black. The product is manufactured in India. Comes with a Protective Plastic Carrying Case.

Screw Chek'r SAE/Inch Screw Checker No. 4 to 1/2 1/8 Inch Heavy Gauge Steel Screw Checker, Made In USA - Etched graduations are filled in black to give high contrast and will not wear off this drill gauge. This tool can also be used to straighten bent screws and clean dirty or rusty threads. Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. Fraction Drill Gauge. Say goodbye to frustration with this easy to use, and mechanics can save time and money by accurately identifying different types of screws the first time.

1 through 5/16 inch in NC, and NS pitches.





Fraction-Decimal Conversion Chart for Designers Engineers Mechanics Inches Millimeters Sticker Decal 5x7 inches

Sticker Frenzy - Message us to Customize Your Sticker Today! This drill gage is made from stainless steel to prevent rust. The tap drill reference table works with National Fine, National Course, American Standard Pipe and Metric threads. This tool can also be used to straighten bent screws and clean dirty or rusty threads.

Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. Front side has a machine screw size tap drill chart for recommended 75% depth thread. Applicable on any smooth Surface Vehicles, Laptops, Windows, Mirrors, and Etc. Easy to Apply and Remove. Our stickers make great gift for you, your family and friends.

Fraction-Decimal Conversion Chart for Designers Engineers Mechanics Inches Millimeters Sticker Decal 5x7 inches - Perfect for indoor or outdoor use. Features a convenient 6 inch ruler for any additional measuring. The hobby drill gage is a useful guide for identifying drill bit sizes and measures bits from 1/16 inch to 1/2 inch x 64ths. Sticker frenzy Products are Completely Customizable. This tool can also be used to straighten bent screws and clean dirty or rusty threads.

Made from high quality 1/8 inch Heavy Gauge Satin Chrome Plated Steel. 4 through 1/2 inch in the UNC and UNF pitches.