3M Scotch-Weld Low Odor Acrylic Adhesive DP8805NS, Green, 45 mL Duo-Pak

#ad
3M 62285214466 #ad - Features spacer beads to control bond line thickness. 4 minute work life with 9 minutes to structural strength. 3m scotch-weld low odor acrylic adhesive DP8805NS is our standard low-odor, non-sag, toughened, two-part acrylic adhesive. Features glass shimming beads to control bond line thickness to prevent excessive squeeze out.

18-month room temperature shelf life simplifies inventory management. Bonds difficult surfaces such as powder coats and oily surfaces. Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives. Fast adhesion and drying time reduces waiting and maximizes work efficiency.

3M Scotch-Weld Low Odor Acrylic Adhesive DP8805NS, Green, 45 mL Duo-Pak #ad - Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives. This adhesive is an ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time.

Durable finished bond with good shear and high impact strength. Durable finished bond with excellent sheer and high impact strength. Bonds difficult surfaces such as most powder coats and plastics.

#ad



3M Scotch-Weld EPX Mixing Nozzle, Square Orange, 45mL, 36 nozzles/case

#ad
3M 62915491369 #ad - Tapered tip can be cut for bead size. Minimize adhesive waste; easy to replace with new nozzle to use remaining adhesive in a cartridge. Choose 3m scotch-weld epx mixing nozzles for efficient application of 3M Scotch-Weld Structural Adhesives in Duo-Pak DP cartridges. Each nozzle provide thorough mixing and precise placement of two part adhesives and potting compounds.

Provides thorough mixing and precise placement of two-component structural adhesives. Available in a variety of designs to fit all cartridge sizes. Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing.

#ad



3M 50004 Scotch-Weld EPX Plus II Applicator W 10:1, 2:1 and 1:1 Plunger Model 91

#ad
3M 50004-6 #ad - Available in a variety of designs to fit all cartridge sizes. This applicator is a low-cost portable, self contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied. Markets: industrial general, solar energy, wind energy, military, sporting goods, composites, electronics, aerospace, transportation and materials.

Applications: gluing, mounting, joints, gluing, fixing, encapsulating and sealing plant. Comes with 10:1, 2:1 and 1:1 plungers. Provides thorough mixing and precise placement of two-component structural adhesives. Markets: general industrial, military, composites, electronics, wind energy, solar energy, sporting goods, transportation and aerospace.

3M 50004 Scotch-Weld EPX Plus II Applicator W 10:1, 2:1 and 1:1 Plunger Model 91 #ad - Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing. Tapered tip can be cut for bead size. Minimize adhesive waste; easy to replace with new nozzle to use remaining adhesive in a cartridge.

#ad



3MTM Scotch-WeldTM EPXTM Mix Nozzles Square Orange, for 45mL 10:1 Duo-Pak Cartridges, Bag of 12

#ad
3M #ad - Provides thorough mixing and precise placement of two-component structural adhesives. Minimize adhesive waste; easy to replace with new nozzle to use remaining adhesive in a cartridge. Markets: general industrial, solar energy, electronics, composites, military, wind energy, sporting goods, transportation and aerospace.

3m approved accessory works with the 3M Duo-Pak cartridge to simultaneously meter, mix and apply two-part adhesives and potting compounds. Performs to exact requirements for easy uniform application. Does not include adhesive or EPX applicator. Some of the 45ml cartridges served: dp8005, dp8810, DP8805, dp8810, dp8010, DP8410.

3MTM Scotch-WeldTM EPXTM Mix Nozzles Square Orange, for 45mL 10:1 Duo-Pak Cartridges, Bag of 12 #ad - No need to buy full case of 36. Includes "NS" versions too. Markets: industrial general, wind energy, sporting goods, solar energy, aerospace, military, composites, electronics, transportation and materials. Applications: gluing, gluing, fixing, joints, mounting, encapsulating and sealing plant. Comes with 10:1, 2:1 and 1:1 plungers.

Does not work on any other size of 3M Duo-Pak. Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing. Available in a variety of designs to fit all cartridge sizes.

#ad



3M Aluminum Foil Tape 3340, 2.5" x 50 yd, 4.0 mil, Silver, HVAC, Sealing and Patching Hot and Cold Air Ducts, Fiberglass Duct Board, Insulation, Metal Repair

#ad
3M 70006658481 #ad - Tapered tip can be cut for bead size. 0 mil total thickness with a strong, pressure sensitive acrylic adhesive is ideal as a vapor seal tape for duct closure. Hot and cold temperatures: combination of a foil backing and acrylic adhesive gives this tape a superb operational temperature range of -40F-300F -40C-149C.

Easy releasing liner: Poly coated Kraft paper liner protects the adhesive and keeps the tape ready for use. Long lasting: the foil backing serves as an excellent barrier against moisture, dust and many chemicals - making it strong, durable and long-lasting. Applications: heating ventilation air conditioning HVAC, rigid fiber glass duct board, duct closure, vapor seal on reinforced fiberglass duct board, flexible air ducts and air connectors.

Listed for both ul181a-P and UL181B-FX. Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing. 3m foil tape 3340 is used in a variety of applications including heating ventilation air conditioning HVAC, rigid fiber glass duct board, metalworking, construction, general industrial, including: transportation, automotive, military and government, specialty vehicle, MRO, vapor seal on reinforced fiberglass duct board, and flexible air ducts and air connectors across a number of industries, duct closure, electronics and aerospace.

3M Aluminum Foil Tape 3340, 2.5" x 50 yd, 4.0 mil, Silver, HVAC, Sealing and Patching Hot and Cold Air Ducts, Fiberglass Duct Board, Insulation, Metal Repair #ad - . When sealing ducts and other surfaces for heating, ventilation and air conditioning systems HVAC, it's essential to have a strong, long-lasting foil tape that can stand up well to hot and cold temperatures. Markets: general industrial, military, composites, solar energy, wind energy, electronics, sporting goods, transportation and aerospace.

#ad



3M Scotch-Weld Low Odor Acrylic Adhesive DP8810NS, Green, 45 mL Duo-Pak, 12/case

#ad
3M 62285414454 #ad - 0 mil total thickness with a strong, pressure sensitive acrylic adhesive is ideal as a vapor seal tape for duct closure. Hot and cold temperatures: combination of a foil backing and acrylic adhesive gives this tape a superb operational temperature range of -40F-300F -40C-149C. Easy releasing liner: Poly coated Kraft paper liner protects the adhesive and keeps the tape ready for use.

Long lasting: the foil backing serves as an excellent barrier against moisture, dust and many chemicals - making it strong, durable and long-lasting. Applications: heating ventilation air conditioning HVAC, duct closure, vapor seal on reinforced fiberglass duct board, rigid fiber glass duct board, flexible air ducts and air connectors.

3M Scotch-Weld Low Odor Acrylic Adhesive DP8810NS, Green, 45 mL Duo-Pak, 12/case #ad - Listed for both ul181a-P and UL181B-FX. Glass bead technology to control bond line thickness to produce consistent quality. Provides thorough mixing and precise placement of two-component structural adhesives. Fast adhesion and drying time reduces waiting and maximizes work efficiency. Bonds difficult surfaces such as powder coats and most plastics.

Durable finished bond with excellent shear and high impact strength. 3m scotch-weld low odor acrylic adhesive DP8810NS is the low-odor, non-sag, toughened, two-part acrylic adhesive. Durable bond with excellent shear, peel and high impact strength.

#ad



Rear Window Defroster/Defogger Tab Bonding Repair Kit 2000 by Frost Fighter

#ad
Planned Products LLC 2000 #ad - Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing. Adhesion promotion for rugged and reliable conductive defroster / defogger tab bonds. Bonds difficult surfaces such as powder coats and oily surfaces. Tapered tip can be cut for bead size. High sliver content for maximum electrical conductivity.

Fast adhesion and drying time reduces waiting and maximizes work efficiency. Low odor and non-flammable properties for a safer working product compared to typical adhesives. 0 mil total thickness with a strong, pressure sensitive acrylic adhesive is ideal as a vapor seal tape for duct closure. Hot and cold temperatures: combination of a foil backing and acrylic adhesive gives this tape a superb operational temperature range of -40F-300F -40C-149C.

Rear Window Defroster/Defogger Tab Bonding Repair Kit 2000 by Frost Fighter #ad - Easy releasing liner: Poly coated Kraft paper liner protects the adhesive and keeps the tape ready for use. Long lasting: the foil backing serves as an excellent barrier against moisture, dust and many chemicals - making it strong, durable and long-lasting. Applications: heating ventilation air conditioning HVAC, rigid fiber glass duct board, vapor seal on reinforced fiberglass duct board, duct closure, flexible air ducts and air connectors.

Listed for both ul181a-P and UL181B-FX. Minimize adhesive waste; easy to replace with new nozzle to use remaining adhesive in a cartridge. Bonds metal tabs back to rear window defrosters.

#ad



Loctite 229732 Black 18398 426 Prism Instant Adhesive Gel, 20 mL Tube

#ad
Loctite 229732 #ad - Durable bond with excellent shear, peel and high impact strength. Bonds difficult surfaces such as powder coats and most plastics. Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing. 10 minute work life with 21 minutes to structural strength. Markets: industrial general, aerospace, solar energy, military, sporting goods, composites, electronics, wind energy, transportation and materials.

Applications: gluing, mounting, gluing, joints, fixing, encapsulating and sealing plant. Comes with 10:1, 2:1 and 1:1 plungers. Durable finished bond with excellent shear and high impact strength. Loctite prism 426 black cyanoacrylate adhesive is compatible with metal, plastic and rubber materials with a 24 hr cure time.

Loctite 229732 Black 18398 426 Prism Instant Adhesive Gel, 20 mL Tube #ad - Low odor and non-flammable properties for a safer working environment compared to typical acrylic adhesives. Brand: Loctite. Approved by General Motors for defroster / defogger repair. Includes "NS" versions too. Vapor seal tape: 2. Fast adhesion and drying time reduces waiting and maximizes work efficiency. Minimum to maximum operating temperatures are -65 F to +210 F.

#ad



CNBTR 50ml Dispenser Gun Impression Mixing Dispensing Gun Applied to 50ml 1: 1/1: 2 AB Plastic Tube

#ad
#ad - 0 mil total thickness with a strong, pressure sensitive acrylic adhesive is ideal as a vapor seal tape for duct closure. Hot and cold temperatures: combination of a foil backing and acrylic adhesive gives this tape a superb operational temperature range of -40F-300F -40C-149C. Easy releasing liner: Poly coated Kraft paper liner protects the adhesive and keeps the tape ready for use.

Long lasting: the foil backing serves as an excellent barrier against moisture, dust and many chemicals - making it strong, durable and long-lasting. Applications: heating ventilation air conditioning HVAC, vapor seal on reinforced fiberglass duct board, rigid fiber glass duct board, duct closure, flexible air ducts and air connectors.

CNBTR 50ml Dispenser Gun Impression Mixing Dispensing Gun Applied to 50ml 1: 1/1: 2 AB Plastic Tube #ad - Listed for both ul181a-P and UL181B-FX. Bonds metal tabs back to rear window defrosters. Includes "NS" versions too. Vapor seal tape: 2. Available in a variety of designs to fit all cartridge sizes. Thick material: the handle is user-friendly, the appearance is generous, and the push rod is durable and not easy to wear.

Suitable cartridge:it's not suit for 3m and it works well on the 50ml kits. Bonds difficult surfaces such as powder coats and most plastics. Don't be distracted by the plunger diameters as this tool also works on similar material kits with 2:1 and 1:1 ratios.

#ad



3M 08190 Performance Manual Applicator for 50 ml Cartridges, 50 Milliliter, Black/Gray

#ad
3M 08190 #ad - Don't be distracted by the plunger diameters as this tool also works on similar material kits with 2:1 and 1:1 ratios. Gorilla, araldite, works with Loctite, Devcon, and others with standard 50ml cartridges. Note: it is not a universal gun and only for industrial usage. Not suitable for VPS、PVS materials and dentistry.

Not work with dp420 37ml cartridges or likely any 37ml nozzles. Designed for use with 3m's 1:1 50mL and 2:1 37. 5ml cartridges. Trade Name: Prism. Adhesion promotion for rugged and reliable conductive defroster / defogger tab bonds. Brand: Loctite. Glass bead technology to control bond line thickness to produce consistent quality.

3M 08190 Performance Manual Applicator for 50 ml Cartridges, 50 Milliliter, Black/Gray #ad - Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing. Low odor and non-flammable properties for a safer working product compared to typical adhesives. Material compatibility: Metal; Plastic; Rubber. Includes "NS" versions too. Vapor seal tape: 2. Markets: general industrial, composites, wind energy, solar energy, sporting goods, electronics, military, transportation and aerospace.

#ad



Epoxy Plunger, 10 to 1

#ad
MMM-3M Scotch-Weld 50007 #ad - Bonds difficult surfaces such as powder coats and oily surfaces. Mix ratio: 10:1. 10 minute work life with 21 minutes to structural strength. Specially used for smearing or dripping various two-component adhesives or coatings to solve the problem of uneven mixing of two-component adhesive products. Size:fitting mixing gun.

Applicable rate: 【1:1 ratio and 1:2 ratio adhesive】 Fitting Capacity of Tube Cartridges : 【50ml Cartridges ONLY】. Bonds difficult surfaces such as powder coats and most plastics. 0 mil aluminum foil backing 4. Markets: general industrial, electronics, composites, sporting goods, wind energy, solar energy, military, transportation and aerospace.

Epoxy Plunger, 10 to 1 #ad - 3m approved accessory works with the 3M Duo-Pak cartridge to simultaneously meter, mix and apply two-part adhesives and potting compounds. Performs to exact requirements for easy uniform application. Does not include adhesive or EPX applicator. Some of the 45ml cartridges served: dp8005, dp8810, DP8805, dp8810, dp8010, DP8410.

Material compatibility: Metal; Plastic; Rubber. Durable finished bond with excellent shear and high impact strength. Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing.

#ad